impact bar

Impact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. It’s designed to absorb impact loading which will dramatically reduce shock and stress loading to the structureFeatures 1.The connection of the arc surface of impact assembly with the conveyor belt enables the conveyor belt to running smoothly and avoids the damage to the belt through the contact between the bar and surface of belt. 2.The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material caused by inequality of the stress on the belt. 3.The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum. 4.Ultra elastic rubber absorbs the impact in the maximum. 5.Each part of the impact bar is closely jointed by hot vulcanization. 6.“T-track” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.Technical DataColor of UHMWPEBlue/WhiteTensile strength(Mpa)30Elongation at break(%)300Hardness(Shore A)95-98Density(g/cm3)0.93-0.94Coefficient of friction0.07Color of rubberBlackTensile strength(Mpa)19Elongation at break(%)400Size and SpecificationLengthWidthHeight122010050, 75, 1001400152416001800 Note 1. Standard fastening accessories including bolt and nylon –inserted hexagon nut are offered. 2. Other types can be made according to customers’ demand.